Hi guys, I'm not really a wizard when it comes to AV setup, I currently have one of these:|
What I'd like to do is replace the player with a Blu-Ray version. I'd like to keep my 5.1 setup if possible. The player I'm guessing would need to be a Samsung? I'd still like like it to have USB and optic line-in. I'd just like to know if this is viable or if there are suitable alternatives to this approach,
Cheers for the help.
Replacing a DVD player from a surround system with a Blu-Ray Player
This is why I hate DVD/BR players with integrated surround sound. See also the "my movies are in surround, how do I get my TV to be in surround sound too?"
You can either buy a new BR played with integrated surround sound, or you can buy a AV receiver + speakers + player separately. Either way, if you want to upgrade you need ditch everything you've got at the moment.
The former is cheaper, but is limited. The latter is more expensive but more future proof and allows you to connect other devices too.
Edited by Chopsen at 11:10:40 17-01-2013
Thanks for the reply, yeah I've always toyed with the idea of buying an AV receiver and doing bit-part upgrades here and there. Alas right now funds don't support this endeavour so I'm just looking for the cheap option to tide me over for a few years.
So I just need a BR player with integrated surround sound and I can just plug that in place? Any recommendations?
AcidSnake 7,927 posts
Seen 5 hours ago
Registered 12 years ago
The speakers should remain compatible with whatever BR player you get (check the wattage of the speakers obviously), only problem would be finding a BR player with 5.1 audio out that isn't sold alongside speakers...
I think Chopsen's suggestions are indeed the only options...
mal 29,326 posts
Seen 3 days ago
Registered 16 years ago
The shonky specs on that site (which claim it doesn't support DVDs, by the way) claim it has an optical input, which I may hazard a guess is a Dolby Digital optical audio input. Presumably, you could buy a new BR player with optical audio out, wire that to your existing amp/DVD player and get full 5.1 sound, meanwhile with video probably going direct to your TV.
Means you'll need two, possibly three remote controls to switch to the BR channel (the DVD/amp one to switch the audio, the BR one to play the disc, and possibly the TV to switch to the BR input) but it's the cheapest option, I think.
Thanks again chaps. It does indeed have optical, I currently have the TV plumbed in through it, I also have a media PC connected to it via this.
I don't really use the surround for TV very much, mostly for watching stuff from the PC and of course DVD's. So if I just buy any BR player and connect it via optical to my DVD player, I can in theory get 5.1 when watching Blu-Rays?
Bear in mind that using optical for audio on BR means you'll get downgraded sound. I *think* you can only get DTS HD and Dolby HD (or whatever they're called) over HDMI. Over optical you'll probably just get normal DTS/Dolby Digital, much the same as a DVD.
Sometimes posts may contain links to online retail stores. If you click on one and make a purchase we may receive a small commission. For more information, go here.